Ply   PE+out PP bag

4x0.125mm   ply= totally 4 layers PE

Loading/Discharging

Top   loading/discharging / Bottom   loading/discharging

Valve

1.   Traditional 3" butterfly valve with anti-suction devise

2. Revolutionary   3" ball valve

a)   Compared with butterfly valve, ball valve is sealed more tightly and with   better resistance to pressure. There is no block when valve is opened, which   make liquid flow through freely and quickly.

b) In   the joint position between internal valve and flexitank, a safety protection   device is added. This device could effectively prevent inner film blocking   the valve, and make residual liquid the minimum after discharging.

3.valve   with 2" or 2.5" quick connector for choice

Flange

Hard PP   instead of steel to reduce the pressure against the flexitank surface thus   reduce the risk of failures.

Safety   Pin

Added on   3" valve to help to source thefting activities if happened during   transportation.

Automatic   Air vent

The   special design of air vent could automatically release air pressure when it   is more than 0.0065Mpa inside of the flexitank. It would keep the cargo and   flexitank safe during loading and transportation.

Upgrading   on protective out PP woven bag

Our engineers   tracked and tested 1000 pieces of flexitanks at different transportation   modes and conditions. We made those of the following revolutionary upgrading:

a)Protective   out layer of BLT flexitank is 8m seamless tubular construction which would   eliminate longitudinal seams.

b)Protective   out layer of BLT flexitanks are made of high-tech aramid fibers, and it has   incomparable advantage at tension and softness performance against ordinary   PP fibers. 

c)Each   250px between woven of the protective layer, there is a high strength zonal   reinforcing rib. Their application will make an innovative upgrade in the   flexitank safety area.

Packing   Capacity in Containers(20" & 40")

The   features of our flexitank (Food Grade)

1)Quality   Management System: ISO9001:2000,   ISO22000 supervision

2)Food grade approval

3) Flexitank   films fully comply with US FDA , European EC, and AAR regulation.

  Category

 Apply   different flexitank materials to different liquid.

Flexitank—Food   Grade

All the   materials must comply with standards of food hygiene. 

Flexitank—Chemical   Grade

Corrosion   resisting materials and valve are took.

 Flexitank—For   Oil

Proper   for oils transportation

Heat-Resisting   Flexitank

Apply   heat-resisting materials,proper   for the storage and transportation of high temperature liquid products.

  Application

In   FLEXITANK it is possible to transport almost any of non-hazardous   liquids,both industrial,and food application:

Foodstuff   and Beverage:

Edible   and animal oils and fats(liquid ands olid), juices   concentrates,syrups,water,wine,honey,food additives,fish sauce,soy   sauce,vinegar.

Industrial   and Chemical:

Technical   and industrial oils,chemical additives,water-reducer,liquid cleaning means,emulsions,glycerin,some   kinds of paints,ink,liquid fertilizers,latex,transformer oils,other   petrochemical products etc